Material type
White Wood Marble is a white linear grain stone with a pale beige-to-white background and closely spaced horizontal grey veins that create a refined wood-and-travertine effect. Polished 20 mm slabs are commercially available, while honed or leathered finishing can strengthen its tactile timber-like appearance. Its directional pattern suits flooring, wall cladding, countertops, bathroom vanities, fireplaces, staircases and furniture, with slabs laid out before cutting to achieve continuous, mirrored or chevron arrangements. Seal worktops and wet-area surfaces and clean them using pH-neutral products. AED pricing depends on line consistency, slab dimensions, thickness, finish, grain matching, fabrication and installation.
White Wood help desk
Share your product, room or fit-out detail and our designer line will guide you on slab selection, finish, sizing, price direction and care.
White Wood products
Browse product groups connected to White Wood. Use the sticky filters to narrow by finish, category, application, color and price while staying inside this section.
No products match these filters yet.
White wood-like layers with linear movement.
Wooden White Marble is a polished contemporary architectural slab with a directional palette of soft white, pale beige, light grey, taupe and occasional dusty rose. Approximate references include #E2DED5 for the principal field, #CAC3B7 for beige layers, #A6A39E for grey bands, #D1BDB7 for rose accents and #F0EEE8 for pale lines. Numerous closely spaced veins run parallel or gently undulate across the slab, resembling bleached timber grain, silk fibres or sedimentary layers. Lines range from hair-fine grey threads to broader beige-white ribbons that may merge into cloudy linear zones. Its rhythm remains calm and controlled rather than fractured. Polishing gives the layers pearly depth. Honing creates a particularly convincing wood-like softness and satin texture. Slab direction should be maintained consistently across adjoining pieces.
Linear Grain, Ancient Origins, Proven Strength
White Wood Grain Marble is quarried in China, with established production associated with Guizhou Province. Published reference data vary between suppliers but include density around 2.51–2.80 g/cm³, water absorption from approximately 0.34% to considerably higher figures, dry compressive strength around 108–143 MPa and flexural strength near 9.2–11.2 MPa. This variability makes quarry-lot testing essential for the premium wood effect luxury surface. Its strongly layered grain must be marked on every fabrication drawing so walls, counters, stairs and floors run consistently. Long components should be supported because wet flexural performance may be notably lower than dry values. Twenty- and 30-millimetre slabs are widely available in polished and honed finishes. Exterior, shower-floor or high-traffic applications require absorption, frost and slip data from the exact Chinese block rather than generic White Wooden figures.
Soft finishes, flexible slab formats and timber-like vein-cut flow.
Elegant horizontal cladding is commonly available polished and honed, with satin, brushed or leathered finishes suitable for walls, floors and furniture. Polished White Wood Vein Marble works well for reception desks, fireplace surrounds, vanity tops and continuous feature panels, while honing creates a convincing wood-like treatment for bathrooms, staircases and hospitality interiors. Full slabs generally range from approximately 2,400–3,200 × 1,300–1,900 mm, with 20 mm and 30 mm as the principal thicknesses. Twenty-millimetre slabs suit supported cladding and furniture, while 30 mm provides improved rigidity for counters, stair treads and projecting shelves. Vein-cut pieces should be numbered and installed sequentially so their horizontal bands continue coherently across joints. Rotated pieces can form chevron or opposing layouts, but the effect should be digitally approved before fabrication. Long surfaces should be sourced from one block to maintain consistent warmth and vein density.
Timber-inspired bathrooms, easy care, smart buying
White Wood Vein Marble is suitable for long vanity counters, bath panels, shower walls and refined natural stripe texture installations where its grain can be maintained in one direction. Mark every panel before fabrication and installation so pieces are not rotated. Use honed smaller-format stone on shower floors and polished slabs vertically. Long basin rails and mitred aprons may require reinforcement where cuts follow weak natural layers. Pale panels should be installed with white non-staining adhesive over complete waterproofing, and changes of plane should remain flexible. Neutral cleaner, rinsing and drying are preferable to acid-based descalers. Current export references range from approximately AED 73 to AED 184 per square metre, depending on slab size and supplier. Selected UAE material should be budgeted around AED 200–500 before directional wastage, fabrication and installation.
| Use | Finish | Thickness | Indoor / sqm | Outdoor / sqm | Supply | Installed | Notes |
|---|---|---|---|---|---|---|---|
| Marble Flooring Tiles | Honed / Brushed | 15 mm / 20 mm | Indoor Use Preferred | Outdoor Patios and Walkways | AED 180–260/m² | AED 90–130/m² | Brushed finish improves grip on outdoor walkways |
| Stair Treads | Honed / Brushed | 20 mm / 30 mm | Indoor preferred — staircases, foyers and corridors | Covered Outdoor Stairs Only | AED 220–320/m² | AED 70–110/m² | Affordable treads with practical installation; textured finish recommended |
| Wall Cladding Panels | Honed / Brushed | 15 mm / 20 mm | Indoor preferred — living rooms, lobbies and corridors | Limited — sheltered exterior walls only | AED 200–290/m² | AED 60–100/m² | Mid-range wall cladding; sealed joints and secure fixing required; sheltered exterior walls only. |
| Bathroom Vanity Tops | Polished / Honed | 20 mm / 30 mm | Indoor preferred — bathrooms and powder rooms | Limited — covered outdoor bathrooms only | AED 200–290/m² | AED 90–150/m² | Affordable bathroom top; protect from cosmetics and standing water. |
| Console Table Tops | Polished / Honed | 20 mm / 30 mm | Indoor preferred — foyers, hallways and lounges | Limited — covered patios only | AED 200–290/m² | AED 100–160/m² | Affordable vanity surface; seal well and use in covered areas. |
Ideal for floors, countertops and feature walls
White Wooden Vein Marble is a sophisticated pale feature stone for directional floors, long counters and feature walls. Align the grain consistently across rooms, corridors and stair landings; random rotation will interrupt the intended timber-like flow. Honed tiles suit active areas, while polished pieces work in formal dry interiors. Countertops are effective on islands, vanities and reception desks when sealed and protected from acids, pigments, direct cutting and heat. Feature walls can run horizontally to widen a room or vertically to increase height, with pale joints preserving visual continuity.
Linear and vein-cut-friendly, but directional, porous and care-intensive.
This white wood-like stone displays linear grain and a refined vein-cut appearance in polished, honed and textured slabs for floors, countertops, feature walls and bathrooms. Its direction improves visual length and natural warmth, which is why interior designers worldwide suggest coordinating it with <a href="https://www.beigemarbles.com/">beige marble</a>. Check performance, thickness, grain alignment, maintenance, fabrication, supply and price before selection.
White Wood-Grain Surfaces, Directional Layout & Surface Fit
Vein-cut White Wood Marble works best on corridor walls, staircase cladding, vanity fronts, fireplace panels and directional floors, where its long linear grain creates the warmth of timber with the permanence of stone. Keep all pieces aligned in one direction for continuity, or reverse selected slabs for symmetry; calmer bands can be used for sealed countertops and bathroom surfaces.
| Use | Weather | Condition | Application | Slip | Care | Best for | Avoid for |
|---|---|---|---|---|---|---|---|
| Vein-cut wall-cladding panels | Interior installation preserves the linear pattern; use outside only with complete weather protection | Suited to interior cladding with consistent lighting and low moisture exposure | Corridor cladding, reception walls and elevator surrounds | No pedestrian slip risk on vein-cut wall cladding | Remove dirt from vein-cut surfaces gently, use neutral cleaner and avoid aggressive polishing | Linear vein-cut cladding for corridors and reception walls | Unsealed exterior walls, wet cladding and abrasive high-contact areas |
| bathroom vanity tops | Ideal for ventilated bathrooms; outdoor vanities need permanent shelter | Best for sealed vanity tops in ventilated, low-impact bathrooms | Contemporary bathrooms, hotel suites, powder rooms and guest vanities | Raised vanity counters fall outside standard slip-testing scope | Wipe splashes quickly, use mild cleaner and maintain scheduled sealing | Sealed contemporary vanity tops in hotels, guest bathrooms and powder rooms | Intensively used vanities with prolonged moisture and aggressive maintenance |
| staircase treads and risers | Most reliable in indoor circulation areas. For outdoor use, provide full shelter, drainage and textured traction. | Sheltered staircases with textured surfaces and reliable drainage | Contemporary staircases, luxury villas, hotels and protected circulation zones | Honed or brushed treads are preferable wherever moisture could occur | Keep nosings clean, dry wet spots immediately and inspect sealed joints | Contemporary protected staircases for villas, hotels and circulation areas | Unprotected circulation steps, loose bedding and abrasive grit buildup |
| reception desk fronts | Best in climate-controlled interiors; exterior counters require full shelter from sun, rain and heat. | Protected reception worktops with secure support and gentle daily use | Luxury welcome-desk cladding for hospitality, retail and commercial reception interiors. | White Wood is not part of the floor, so pedestrian grip does not apply. | Maintain White Wood with gentle daily wiping, prompt mark removal and periodic professional stone sealing. | White Wood is particularly effective for statement front-desk façades in resorts, boutiques and showrooms. | Keep away from luggage strikes, moisture ingress and aggressive disinfectant routines. |
| luxury flooring tiles | Recommended for climate-controlled floors; exterior use should remain shaded, well drained and regularly sealed. | Dry interior flooring with effective drainage, regular sealing and prompt moisture removal. | Interior flooring for private residences, hotels and prestigious public areas. | Low slip risk is achievable with regular cleaning and dry conditions; use entrance matting where moisture may be tracked indoors. | Dust-mop regularly and wash with diluted pH-neutral stone cleaner; inspect joints and repair chipped edges promptly. | Textured premium floors in private residences, hotels and prestigious public areas. | Constantly damp circulation areas, water pooling, industrial rolling loads and poor entrance matting. |
Elegant formal living floors.
A polished contemporary architectural slab gives formal living floors a calm directional rhythm resembling pale timber without sacrificing natural-stone character. White Wood Grain Marble should be specified in a honed finish for pedestrian areas and installed with all bands running in one agreed direction. Dry-lay tiles or slabs to blend warmth and vein density across the room. The substrate must be rigid, level and continuously supported, with movement joints carried through the finished layout. Use felt pads beneath furniture, lift rather than drag heavy items and maintain the floor with pH-neutral cleaning and periodic resealing.
Related materials
These are main material family pages, not more material types, so this detail page stays focused on White Wood while still giving crawlable internal links.
236 types · 149 products
Premium natural marble for luminous veining, luxury products and architectural interiors.
3 types · 37 products
Warm porous natural stone with earthy bands for textured luxury interiors and architectural pieces.
3 types · 37 products
Translucent luxury stone with dramatic depth, veining and backlit decorative potential.
1 types · 11 products
Dense and durable natural stone for hard-wearing counters, surfaces and premium utility pieces.
1 types · 11 products
High-performance natural stone with marble-like elegance and stronger day-to-day durability.
1 types · 13 products
Engineered large-format surface with consistent patterns, low maintenance and modern performance.
1 types · 11 products
Soft warm natural stone with calm texture for elegant interiors and relaxed decorative pieces.
1 types · 12 products
Composite stone surface with chips and character for playful, modern and durable design.
1 types · 11 products
Gemstone-style decorative slab material with rich bands, color and strong luxury impact.
1 types · 10 products
Elegant white-to-grey natural stone family with soft movement and refined interior appeal.
White Wood FAQ
White Wood or White Wooden Marble is most consistently documented as a Chinese wood-grain marble quarried in Guizhou Province. Its pale white beige and grey layers are produced by cutting along strongly bedded mineral bands. Closely spaced grey lines create a dense timber grain while wider cream bands produce a lighter calmer appearance. Dusty-rose undertones occur only in warmer quarry layers and should not dominate premium neutral selections.
Polishing gives White Wood Marble a pearly sheen, strengthens the distinction between pale beige, grey and rose-toned layers and makes the directional grain appear deeper. On formal flooring, however, a glossy surface can produce glare, reveal scratches and traffic lanes and become slippery when exposed to moisture or grit. Honing reinforces the stone’s timber-like softness, reduces reflection and makes ordinary wear less obvious. It is therefore the better general finish for formal circulation spaces, with a more textured treatment considered at entrances or wet transitions after slip testing. The layout is as important as the finish. Run the grain continuously in one direction to lengthen a hall, align it across adjoining rooms where continuity is required, or use a deliberately designed chevron. Avoid random 90-degree rotation. Blend tiles from the complete batch because warmth and line density vary. For countertops, polishing creates the strongest pearlescent layering, while honed or soft-touch finishing is more practical for frequently handled surfaces. Maintain the grain through backsplashes and mitred waterfall ends, provide full support and keep prominent seams away from openings. Specialist suppliers identify White Wood as a Chinese or Guizhou wood-grain marble available in vein-cut, cross-cut, polished and honed forms, but some trade pages report broader origins; the actual quarry should be confirmed for the selected stock.
White Wood Marble is highly suitable for directional wall cladding, staircases and furniture. Multiple suppliers identify it as Chinese natural stone, commonly from Guizhou, with a pale linear wood-grain pattern. Some sellers classify closely related material as limestone, so the project should confirm petrography and technical properties for the exact batch. On wall panels, run the grain horizontally for width, vertically for height or use consecutively cut slabs for a controlled mirror layout. Stair treads and risers should share one grain orientation; random rotation creates visual breaks. Use honed, brushed or another independently slip-tested finish on treads and keep strong layers away from thin nosings. Furniture pieces need rigid framing, with the grain continued through mitred edges and fixing points placed away from pronounced seams. Sort the complete lot for beige, grey and rose warmth before fabrication. Honing or leathering generally gives the most convincing timber-like surface and hides handling wear better than polish.
White Wood Marble’s grain should be treated like natural timber. Run the lines continuously through wall panels and along the longest dimension of stair treads. Keep every tread oriented consistently rather than alternating the direction. For furniture, cut tops, aprons and mitred edges from adjoining slab areas so pale-grey bands appear to wrap naturally around the form. Chinese suppliers identify White Wood as a linear wood-grain marble or limestone-based marble selection. Seal countertops, vanity pieces, stair nosings and other absorptive areas, testing annually in high-contact locations. Its pale beige background exposes oils, shoe marks, rust and coloured spills. Polished material makes acid etching and scratches visible through loss of reflection. Honed or brushed material reinforces the wood-like appearance and disguises wear more effectively, although oils can darken it. Use pH-neutral cleaner and remove grit frequently from stairs and floors.
Slip resistance depends on finish and environment. Polished White Wood Marble can be slippery when wet, while honed, brushed or lightly textured treatments generally provide better grip; request a finish-specific test for bathrooms, entrances or commercial flooring. Clean with pH-neutral stone cleaner and a soft mop, remove grit frequently, rinse and dry, and seal where required. Keep the directional grain aligned during installation. White Wood is a Chinese natural marble, commonly associated with Guizhou, and is also sold as White Wooden, White Sandalwood or light wood-grain marble. Compared with wood-look porcelain, it offers genuine mineral depth, unique continuous bands and a more luxurious natural surface. Porcelain is lower-maintenance, less absorbent, more resistant to acids and stains and available with formal slip-rated finishes, but its printed patterns can repeat. White Wood requires more care and batch matching but delivers authentic variation that manufactured tile cannot fully reproduce.